Pro3 Series
3D Printer
/ User Manual
Read the following information to ensure safe usage of the appliance.
A.
Safety
General information
1
Intended use
2
Restriction on user group
3
Safe installation
4
Proper use gives information regarding the correct and safe usage of the printer.
The printer should only be used:
Avoid risks to children and vulnerable persons.
Children must not play with the printer.
Keep children and pets away from the printer.
Any damage or loss resulting from failure to follow the directions or warnings
provided in this manual will not be covered under the product warranty. To
ensure the printer is used safely and efficiently, carefully read through the entire
manual.
This manual is intended for the installer and the user of the printer. Follow the
safety instructions and warnings.
Please keep the instruction manual and the product information safe for future
reference or for the next owner.
When unboxing the printer it should be checked for any damage that may have
happened in transit.
If any damage is observed the printer should not be powered on before contact-
ing support.
If you have any questions, please contact our local service center or distributors.
In accordance with the information provided in this manual.
In a well ventilated and dry environment.
In an environment between 0-35°C.
In an environment with relative humidity below 95%(when at a temperature of
25°C).
Ambient temperature of 0-35°C;
Relative humidity of the air is below 95% (when the temperature is 25°C).
Take note of the safety instructions when installing the printer.
WARNING ‒ Risk of electric shock!
Improper installation is dangerous.
02