Pro3 Series
3D Printer
/ User Manual
A.
Safety
It is dangerous to use an extended power cord or unapproved adapter.
Damaged insulation of the power cord is dangerous.
Never let the power cord come into contact with hot printer parts or heat
sources.
Never let the power cord come into contact with sharp points or edges.
Never kink, crush or modify the power cord.
WARNING ‒ Risk of fire!
Careful when lifting the machine. The weight of the machine may cause injury
when lifted.
Connect and operate the printer according to the specifications on the rating
plate.
Connect the printer to a power supply with an alternating current only via a
properly installed outlet with grounding.
The protective conductor system of the domestic electrical installation must
be properly installed. The installation must have a sufficiently large cross-sec-
tion.
Please ensure that the power supply system (current, voltage, and cables) can
meet the normal load requirements of the printers.
Please ensure that the power supply system (current, voltage and cables) can
meet the normal load requirements of the electrical printers.
Never equip the printer with an external switching device, e.g. a timer or
remote control.
When installing the printer, check that the power cable is not trapped or
damaged.
Select the fuse according to the fuse safety identification requirements.
The power plug and the socket must match, the grounding blade must work
properly, and the body must be properly grounded.
Stop the machine and ensure the outlet for the printer is properly grounded.
If you have any questions, consult a professional electrician.
Do not use extension cables or multiple socket strips.
If the power cord is too short, contact Customer Service.
Only use adapters approved by the manufacturer.
WARNING ‒ Risk of injury!
Do not lift the machine on your own.
WARNING ‒ Risk of suffocation!
Keep packaging material away from children. Do not allow children to put
packaging material over their heads or wrap themselves up in it as it could lead
to suffocation.
03