Raisecom
ISCOM2600G (A) Series Product Description
4 Device installation
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
53
Figure 4-7
Wall-mount installation
Step 5
Swing the device using proper strength to see whether it is secured.
4.1.3 Connecting cables
Connecting fiber
There is invisible laser which harms eyes inside the ISCOM2600G series switch. Do
not stare into the optical interface, fiber connector, or breakage of fiber directly.
Connect fiber as below:
Step 1
Remove the dustproof cover from the SFP optical interface and SFP optical module, and
insert the SFP optical module into the optical interface on the ISCOM2600G series switch, as
shown in Figure 4-8.
Figure 4-8
Inserting SFP optical module
Step 2
Remove the dustproof cover from the LC/PC fiber, align the fiber with the SFP optical
interface, and insert the fiber slightly into the SFP optical interface, as shown in Figure 4-9.
