Raisecom Technology Co., Ltd
2
Contents
1.
Cautions ...........................................................................................................................................1
2.
Overview ..........................................................................................................................................3
2.1.
Main Features ..........................................................................................................................3
2.2.
Part Number Introduction .........................................................................................................3
2.3.
Dimensions ..............................................................................................................................4
3.
Parameters.......................................................................................................................................5
3.1.
E1 Interface Specification ........................................................................................................5
3.2.
Optical interface characteristic .................................................................................................5
3.3.
Power Supply...........................................................................................................................5
3.4.
Ambience .................................................................................................................................5
4.
How to use .......................................................................................................................................6
4.1.
Introduction of the Front Panel.................................................................................................6
4.1.1.
Power indicator ................................................................................................................6
4.1.2.
Alarm indicator .................................................................................................................6
4.1.3.
DIP-switch SW1 Setup: All OFF by Default .....................................................................6
4.1.4.
DIP-switch SW2 Setup: All OFF by Default .....................................................................8
4.1.5.
Function Buttons: All “High Position” by Default ..............................................................8
4.1.6.
Optical Port ......................................................................................................................8
4.1.7.
Network Management Port ..............................................................................................8
4.2.
Introduction of the Rear Panel .................................................................................................9
4.2.1.
Power Switch ...................................................................................................................9
4.2.2.
Power Socket...................................................................................................................9
4.2.3.
E1 Interface .....................................................................................................................9
4.2.4.
The Expansion Slot 1 and Slot 2......................................................................................9
4.3.
DIP-switch on the Bottom Panel ............................................................................................10
5.
Installation and Test .......................................................................................................................11
5.1.
Inspect after Opening.............................................................................................................11
5.2.
Preparation before Installation ...............................................................................................11
5.3.
Installation Procedure ............................................................................................................11
5.3.1.
Connecting Cables.........................................................................................................11
5.3.2.
Applying the Power Supply ............................................................................................11
5.3.3.
Configuring Buttons and Switches .................................................................................12
6.
Troubleshooting .............................................................................................................................13
7.
Appendix A Introduction of SUBM-4E1 Sub-module ......................................................................15
B.1 E1 Cable ......................................................................................................................................15
B.2 Computer Serial Cable Making ....................................................................................................15
