background image

www.raisecom.com                                                                                                                                     

 User Manual

 

 

2           

or DC power supply 

RC831-240E-S2 

Stand-alone device, 8 lines of E1 service provided by 4 expansion 
slots in which sub-cards like E-SUBM-FV35, E-SUBM-2FV35, 
E-SUBM-2FE, E-SUBM-FE4E1, E-SUBM-2E1, E-SUBM-4E1-BL, 
and etc. can be inserted, 1 optical interface, dual-strand, single-mode 
(DSC/PC), transmission distance 10~60km, single power supply, AC 
or DC power supply 

RC831-240E-S3 

Stand-alone device, 8 lines of E1 service provided by 4 expansion 
slots in which sub-cards like E-SUBM-FV35, E-SUBM-2FV35, 
E-SUBM-2FE, E-SUBM-FE4E1, E-SUBM-2E1, E-SUBM-4E1-BL, 
and etc. can be inserted, 1 optical interface, dual-strand, single-mode 
(DSC/PC), transmission distance 15~120km, single power supply, 
AC or DC power supply 

RC831-240E-SS13 

Stand-alone device, 8 lines of E1 service provided by 4 expansion 
slots in which sub-cards like E-SUBM-FV35, E-SUBM-2FV35, 
E-SUBM-2FE, E-SUBM-FE4E1, E-SUBM-2E1, E-SUBM-4E1-BL, 
and etc. can be inserted, 1 optical interface, single-strand, 
single-mode (SC/PC), TX wavelength 1310nm, RX wavelength 
1550nm, transmission distance 0~25km, single power supply, AC or 
DC power supply 

RC831-240E-SS15 

Stand-alone device, 8 lines of E1 service provided by 4 expansion 
slots in which sub-cards like E-SUBM-FV35, E-SUBM-2FV35, 
E-SUBM-2FE, E-SUBM-FE4E1, E-SUBM-2E1, E-SUBM-4E1-BL, 
and etc. can be inserted, 1 optical interface, single-strand, 
single-mode (SC/PC), TX wavelength 1550nm, RX wavelength 
1310nm, transmission distance 0~25km, single power supply, AC or 
DC power supply 

RC831-240E-SS23 

Stand-alone device, 8 lines of E1 service provided by 4 expansion 
slots in which sub-cards like E-SUBM-FV35, E-SUBM-2FV35, 
E-SUBM-2FE, E-SUBM-FE4E1, E-SUBM-2E1, E-SUBM-4E1-BL, 
and etc. can be inserted, 1 optical interface, single-strand, 
single-mode (SC/PC), TX wavelength 1310nm, RX wavelength 
1550nm, transmission distance 10~50km, single power supply, AC or 
DC power supply 

RC831-240E-SS25 

Stand-alone device, 8 lines of E1 service provided by 4 expansion 
slots in which sub-cards like E-SUBM-FV35, E-SUBM-2FV35, 
E-SUBM-2FE, E-SUBM-FE4E1, E-SUBM-2E1, E-SUBM-4E1-BL, 
and etc. can be inserted, 1 optical interface, single-strand, 
single-mode (SC/PC), TX wavelength 1550nm, RX wavelength 
1310nm, transmission distance 10~50km, single power supply, AC or 
DC power supply 

 

Summary of Contents for RC831-240E






























Reviews: