G.783 Characteristics of synchronous digital hierarchy (SDH) equipment functional blocks
G.784 Synchronous digital hierarchy (SDH) management
G.803 Architecture of transport networks based on the synchronous digital hierarchy (SDH)
G.813 Timing characteristics of SDH equipment slave clocks (SEC)
G.823 The control of jitter and wander within digital networks which are based on the 2048
kbit/s hierarchy
G.825 The control of jitter and wander within digital networks which are based on the
synchronous digital hierarchy (SDH)
G.826 End-to-end error performance parameters and objectives for international, constant
bit-rate digital paths and connections
G.828 Error performance parameters and objectives for international, constant bit-rate
synchronous digital paths
G.829 Error performance events for SDH multiplex and regenerator sections
G.831 Management capabilities of transport networks based on the synchronous digital
hierarchy (SDH)
G.841 Types and characteristics of SDH network protection architectures
G.842 Interworking of SDH network protection architectures
G.957 Optical interfaces for equipments and systems relating to the synchronous digital
hierarchy
G.691 Optical interfaces for single channel STM-64 and other SDH systems with optical
amplifiers
G.664 Optical safety procedures and requirements for optical transport systems
I.731 ATM Types and general characteristics of ATM equipment
I.732 ATM Functional characteristics of ATM equipment
IEEE 802.1Q Virtual Local Area Networks (LANs)
IEEE 802.1p Traffic Class Expediting and Dynamic Multicast Filtering
IEEE 802.3 CSMA/CD Access Method and Physical Layer Instruction
