16
Chapter 5
Typical Application
As is shown in the figure above, both central office 1 and 2 must apply Raisecom RC901 and RC902 series
4 E1 converters.
The device with 4 E1 channels must support E1 data transparent transmission, like SDH, PDH, and etc.
For devices communicate with the 4 E1 interfaces, please follow the instruction in the following table:
Central office 1
device
Central office 2
device
Remote management ability of network
management module placed at central office 1
RC901-FE4E1
Configure and query all interface parameters of
central office 1 and 2 device
RC902-FE4E1 Configure
and
query all interface parameters
excluding the parameters of Ethernet interface at
central office 2. Parameters of Ethernet interface
at central office 2 can only be queried.
RC902-FE4E1-BL
RC902-FX4E1 or
RC912-FX4E1
Configure and query all interface parameters
excluding the parameters of Ethernet interface at
central office 2. Parameters of Ethernet interface
at central office 2 can only be queried.
Twisted Pair
LAN 1
RC902-FE4E1-BL
4 Line of E1
RC901-FE4E1
or RC902-FE4E1
SDH/PDH
Transmission
Network
4 Line of E1
LAN 2
Twisted Pair
Central Office 1
Central Office 2
