8
06.14
Josef Kihlberg a.560PN22
6.3 ADJUST STAPLE CLINCH
Be sure that the tool is not pointing at
yourself or anyone else when connec-
ting it to the compressed air line.
It is possible to adjust how tightly the staples are
closing.
– With a small screwdriver turn the adjusting nut
behind the slot (Fig. 6/1). Turn clockwise to close
the clinch (6/A). Turn the adjusting nut anticlockwise
to open up the clinch (6/B).
A
B
Fig. 6
Fig. 7
To short
Correct
To long staple
Fel
To short
Correct
To long staple
Fel
To short
Correct
To long staple
Fel
3
2
1
1
6.4 CONTROL THE CLINCH
1
Good clinch.
2
Leg length of the staple too long or over bended.
3
Leg length of staple too short or not enough
bended.
If necessary adjust staple clinch, see chapter 6.3.
Always use Josef Kihlberg original
staples: JK560-22.
