4
RAK
7205
4
RAK7258 Installation Guide V1.0
2
Assembly
Step 1
: Assemble the cover according to different requirements:
1)
If there are no solar panels, plug the opening of the cover with M16
Dome plug.
2) If solar panel is needed, stick it to the cover with silicon glue.
Step 2
: Installation of Supporting Plate with two M4*5 Screws
Step 3
: Use three M16 Dome plugs and two M12 Dome plugs to plug the opening of the
bottom shell (left of the figure below). If an external antenna or an external interface is
needed, replace the corresponding hole with the corresponding cable (right or below).