V4.1.0R
22
RAK
7244
You will be sent to the following screen:
You can leave it as it is by default, just remember that if you choose to modify
it you should use a real and valid APN name.
Lastly, set the baud rate, the default value is 115200:
This finishes the LTE network configuration portion. Now let us test the
connection. Execute the command “
sudo pppd call gprs
”:
There will be a long log, most importantly however, you should see the
following information at the end (this is again for the EU example):
You have been assigned an IP address (local and remote) as well as DNS
addresses. If you have this information as per the image, your connection
has been established.
