Documentation Center
📝
NOTE
If you experience any error in compiling the example sketch, check the updated code for your WisBlock
Core Module that can be found on the
RAK1901 WisBlock Example Code Repository
and this sample
code in Github will work on all WisBlock Core.
3. Once the example code is open, install the
library by clicking the yellow highlighted link, as
shown in Figure 9 and Figure 10.
Figure 9: Accessing the library used for RAK1901 Module
Figure 10: Installing the compatible library for RAK1901 Module
4. After successful installation of the library, you can now select the right serial port and upload the code, as shown
in Figure 11 and Figure 12.
