Documentation Center
Figure 2: RAK2247 WisLink LPWAN Concentrator to a PCIe-to-USB board
2. Open the command line then enter the command below in order to clone the Github repository that is required
for the process to be completed:
3. Get the name of the interface you are using to connect to the internet by typing the command:
An example in Figure 2 shows the name of the wireless interface “wlx6045bdf0cf64”.
Figure 3: Network Interface Name
Enter the RAK Folder through:
git
clone https://github.com/RAKWireless/rak_common_for_gateway.git
ifconfig
sh
sh