Copyright © Shenzhen Rakwireless Technology Co., Ltd
ETDX1602241830
12
RAK475 Instruction manual
3.
Instruction encyclopedia
3.1
Network configuration method
The transparent transmission module aims at data communication in the end, WIFI
communication is carried out under the preconditions of parameter configuration,
the important thing is the network configuration (network name, PIN and IP address)
and which kind of communication protocol socket set (TCP, UDP and SSL security) to
use. The module defines the following two concepts for the parameters.
At first, the module defines two parts, namely, Factory Defaults parameters and user
parameters.
Factory Defaults parameters: the module maintains the parameters of the initial
status when it is not regularly used (generally acts as AP access point), at this time,
the module has independent network name, fixed IP address, etc. The Factory
Defaults mode ensures the recovery of the module, so as to avoid the problems
caused by users’ configuration mistakes. (Factory Defaults parameters can be
modified by customers)
User parameters: when the module was regularly configured, the module will enable
a new configuration to be user parameters as will be automatically loaded when the
module resets, the user parameters are the configuration of actual application of
customers. (can write once)
In order to transfer from the Factory Defaults mode to the user mode easily, the
transparent transmission module provides four kinds of flexible configuration
methods to connect to the user’s router:
Access the Web server with the built-in module via the browser to carry out
parameters modification
Use WPS function to connect with the router rapidly
Use EasyConfig function to realize the connection with the router
