Copyright © Shenzhen Rakwireless Technology Co., Ltd
ETDX1602241830
28
RAK475 Instruction manual
at+ping=<host>, <count>, <size>\r\n
Ping network host command
at+tcp_status=0\r\n
Query the connection status of TCP
at+net_info\r\n
Query the connected network
inFormation
Instruction for receiving and sending data
at+send_data=0,dest_port,dest_ip,datalen,datab
uffer\r\n
Send data from Socket
at+recv_data=0,dest_port,dest_ip,datalen,datab
uffer\r\n
Receive data from Socket
Read and write NVM data
at+nvm_write=<addr>,<len>,<data>\r\n
Write data to NVM
at+nvm_read=<addr>,<len>\r\n
Read NVM data
Set the certificate command
at+set_cert=<cert_type>,<file_len>,<data_strea
m>\r\n
Set ssl security certificate
InFormation storage commands for the user networking list
at+read_userlist_num\r\n
Read the inFormation number of
current list
at+read_userlist=<index>\r\n
Read the networking inFormation in
the indicated lists
at+write_userlist=<index>,<len>,<data>
Write the networking inFormation
to the indicated lists
at+delete_userlist=<index>\r\n
Delete the networking inFormation
in the indicated lists
Firm ware upgrading command
at+upgrade\r\n
Enter into the upgrading mode
4.3
Command Format
From the host to the module: at+<command>=<parameter 1>, <parameter 2>,
<parameter n>\r\n
Parameters included in all the AT commands are all ASICII codes, for example:
at+scan=0,TP-LINK_2.4GHz\r\n
After each piece of command is carried out, the module will send the returned value
