Documentation Center
Figure 5: RAK7258 WisGate Edge Lite Back Panel
Status LED Indicators
Reset Key Functions
The function of the Reset key is as follows:
1. Short press: Restarts the Gateway
2. Long press (5 seconds and above): Restore Factory Settings
Access the Gateway
In this section, several ways in accessing the gateway are provided to have different alternatives for you to choose
depending on the availability of the requirements needed.
LEDs
Status Indication
PWR
Power Indicator, LED is on when the device is powered
ETH
ON– link is up, OFF – link is down, Flashing – Data is being transferred
LoRa
ON - LoRa module status is up, OFF – LoRa module status is down, Flashing – LoRa module
data is being transferred
ACT
Reserved for future use
STAT
Reserved for future use
WLAN
AP Mode : ON - WLAN status is up, Flashing - Data is being transferred
STA Mode : Slow Flashing (1Hz) - Disconnected, ON - Connected, Flashing - Data is being
transferred
