Documentation Center
Figure 9: The Things Network Home Page
1. In the Register Gateway menu, select the “I’m using the legacy packet forwarder” option, and fill-in the
Gateway EUI.
Figure 10: Registering your Gateway
📝
NOTE:
The Gateway EUI can be found either on the sticker on the casing or via the LoRa Packet Forwarder page
in the LoRa Gateway menu once you log via the Web UI.
2. Select your
depending on your location. This should populate the Router field. Optionally you
can choose to enter the Gateway coordinates in the map’s upper right corner and select if the gateway is indoor
or outdoor via the Antenna placement field below the map.
3. Upon successful registration you should see the following screen: