Documentation Center
Figure 21: H-Shaped Nuts and Bolts Placement for the Bracket
2. Mount the battery on top of the two parallel rails in the middle. Make sure it is as close as possible to the middle
of the construction. Fasten it to the rails with four bolts, each having a washer and a nut. Refer to the image
below on how to insert the bolts into the railing that is part of the bottom of the battery casing.
⚠
WARNING
Tighten the bolts as possible as the battery is quite heavy.
Figure 22: Mounting the Battery to the Bracket
3. Connect the input port power cable of the Lithium Battery to the screw terminals on the back of the Solar Panel.
The image below shows the connection on the back of the solar panel.
⚠
WARNING
Make sure to follow the connection in the image below as interchanging the wires would reverse the
polarity. Reversing the polarity when connecting the battery is dangerous and may cause a fire.
