Documentation Center
Figure 14: Mounting the clamp to the pole
3. Connect the pole clamp and the cross bracket by securing the last piece of the mounting kit in place using
M6*30 bolts, washers, and nuts.
Figure 15: Fixing the enclosure to the pole clamp
Weather Protection
To better protect the Ethernet cable gland and the antenna connector from the weather, you need to cover them
with PVC tape.
1. Clean the surface area of the connector that will be wrapped. Wrap a layer of PVC tape with a 50% overlap
according to the rotation direction of the connector. Continue wrapping the PVC tape to about 10 mm below the
end of the connector.
Figure 16: Wrapping with PVC tape
