FOR THE MODELS WITH SCREW-DOWN CROWNS
If the self winding watch «Raketa» has not been
used in a long time and has stop it can be
manually wind up. To do so, unscrew the crown
from the case by turning it counterclockwise to
position 2.
Rotate clockwise the crown in position 2, 6 to 10
times.
Screw down the crown back into the case.
If the watch rested for a short time and did not
stopped, manual wind up is not necessary.
For setting the date (mechanism 2616)
Pull out the crown from the position 3 and make
sure to push it back to position 2. Repeat the
operation till you reach the right date.
For setting time
Pull out the crown to position 3.
Set the time by turning the hands clockwise.
Firmly push the crown back to position 1 and
screw it down into the case.
2.
1.
3.
2.
1.
3.
2.
1.
3.
FOR THE MODELS WITHOUT SCREW-DOWN CROWNS
SET TIME ON THE WATCHES «RAKETA» CALIBRE :
2615, 2624, 2616 - AUTOMATIC WINDING
If the self winding watch «Raketa» has not been
used in a long time and has stop, it can be
manually wind up. Rotate clockwise the crown
in position 1 ,15 to 20 times.
If the watch rested for a short time and did not
stopped, manual wind up is not necessary.
Manually wind up only a watch fully stopped.
For setting time :
Pull out the crown to position 2.
Set the time by turning the hands clockwise.
Firmly push the crown back to position 1.
2.
1.
2.
1.
ENGLISH
Push back the crown to position 1 and screw it
down into the case clockwise to guarantee the
water-resistance of the watch.
2.
1.
3.
9