To set-up the Cloud Gateway:
1) Visit my.rakocontrols.com to create an account to link the Cloud Gateway as
prompted by the display on the device.
2) Verify the Rako account using the confirmation link sent to the email of the registered
account.
3) Once the account is verified return to my.rakocontrols.com. Select “Link device” on
the homepage.
4) A Link code is required to set-up the Cloud Gateway. This is read from the display
on the Cloud Gateway device itself: press “tick” to show link code.
If the code does not appear and the display reads “Rako Controls” press “down” followed by “tick” to
show the code.
5) Give a nickname to the device and enter this code. Press the “Link device” button to
complete set-up.
6) The Cloud Gateway is now ready to be used.
Additional information and updates on the Cloud Gateway is available at my.rakocontrols.com
Cloud Gateway
Manual Version 1.0.1
