RAK7249/58
18
RAK LoRaWAN Industrial Gateway Configuration Guide
Gateway
Here you can add a Gateway. You simply need to input the EUI into the text box and press
the
Add
button. Additionally you can add a Name, Description and the coordinates of the
Gateway.
Gateway Backend Configuration
By filling this section, you are pointing the LoRa Network Server to the MQTT Broker
MQTT Broker Address:
The IP Address where the MQTT Broker is hosted.
MQTT Broker Port:
The corresponding port.
Client ID:
The user can input a custom Client ID (Will be reflected in the MQTT Broker data).
Clean Session:
If this slider is in the on position, every new connection to the MQTT Broker will open a new
session. All meta-data from previous one will be removed.
Will Retain:
This slider determines if the published messages from a client will be retained.
Enable User Authentication:
If this is switched on, a Username, Password, and a Certificate (Disabled by default) will be
required for user authentication.
SSL/TLS Mode:
Choose the certificate type here:
CA Signed server certificate, Self-signed server certificate, Self-signed server & client
certificate
. All certificated have support for TLSv1, TLSv1.1, and TLSv1.2.
MQTT Topic
Here you can get information on the topic templates:
Uplink MQTT topic, Downlink MQTT
Topic, Downlink Acknowledge MQTT Topic, Gateway Statistic MQTT Topic.
