7
Scanning modes
The scanner has two scanning modes: hand-held and auto-detection. When the scanner is scanning,
ensure the scan line crosses every bar and space of the symbol.
RIGHT
WRONG
Figure 5
The auto-detection scanning mode has two operating modes: in-stand and always ON. The following is
an introduction to in-stand auto-detection mode.
1.
When the scanner is seated in the stand, the scanner operates in auto-detection mode (see Figure
6). When scanner is removed from the stand, it operates in its normal hand-held mode.
2.
To scan a bar code, present the bar code and ensure the scan line crosses every bar and space of
the symbol.
3.
Upon successful decode, the scanner beeps and the LED lights.
4.
When the laser light is off, the present bar code must be removed to active next scanning.
Figure 6
