Take note of the minimum insertion depth of the seat tube.
When adjusting the seat height, note that the marking (1) on the seat tube is not
visible.
3.6 Adjusting the seat position
In order to achieve a suitable seating position you can adjust the seat inclination on
your cargo bike and the distance to the handlebar.
1.
Turn the screw (1) or the screws (2) or (3) below the saddle one to two
rotations in a clockwise direction.
2.
Position the saddle in such a way that you assume a suitable seating position
and so that you are able to operate all of the components on the handlebar
safely during the journey.
3.
Tilt the saddle in such a way that you can adopt a suitable seating position. A
horizontal seating position is recommended. For seat tubes with 2 or 3 screws,
you can set the inclination by turning the loosened screws against one
another.
4.
Pull the screw(s) beneath the seat in a clockwise direction, taking account of
the torques.
5.
Check whether you are able to move the seat.
Summary of Contents for Stride 2
Page 49: ......