battery is saved. If your Raleigh Stride is powered by two batteries, the battery charge
indicator displays the state of charge of both batteries. Note: The indicator and LEDs
give an indication, not an exact percentage.
5.4 Instructions for using the battery
By default, your Raleigh Stride is equipped with one Bosch battery. A second battery
is optional. The battery is located at the bottom of your steer, at the back of the box.
Warning: Always charge the battery in a dry environment.
5.4.1 Charging the battery
Use only the charger included with your e-bike or an identical original Bosch charger.
Only this charger is compatible with your Raleigh Stride lithium-ion battery. Note: The
battery is supplied partially charged. To ensure full battery capacity, fully charge the
battery in the charger before using it for the first time. To charge the battery, read
and follow the instructions in the operating manual for the charger.
The battery can be charged at any state of charge. Interrupting the charging process
does not damage the battery. The battery has a temperature monitoring function
which only allows to be charged within a temperature range of 0 °C to 40 °C. If the
temperature of the battery is outside this charging range, three of the LEDs on the
battery charge indicator will flash. Disconnect the battery from the charger and let it
acclimatise. Do not reconnect the battery to the charger until it has reached the
correct charging temperature.
The five green LEDs on the battery charge indicator indicate the batte
ry’s state of
charge of when the battery is switched on. Each LED represents approximately 20 %
of the charging capacity. When the battery is fully charged, all five LEDs will be lit. The
battery’s state of charge when switched on is
also shown on the display of the
onboard computer. Read and follow the instructions in the operating manuals for the
drive unit and on-board computer. If the battery capacity is less than 5 %, all the LEDs
on the battery charge indicator on the battery will go out. When the battery is empty,
the lightning will stay on up to two more hours. The display function of the onboard
computer, however, will carry on working. Once charging is complete, disconnect the
battery from the charger and the charger from the mains.
Summary of Contents for Stride 2
Page 49: ......