RAMPAGE NAVIGATION HANDLEBAR CONTROLLER
Version 1.7.3
i.
For example: if you push button 2 to select soft app 2, Rally Navigation,
the units led will flash twice to indicate the selection.
ii.
For example: if you select soft app 3 to use OsmAnd, the green led will
flash three times, showing your selection.
iii.
Wait until the led has finished flashing and returns to solid red before
selecting another app or turning to Rider Mode. You need to confirm the
unit knows which app you chose.
d. Pressing Button 5 is
magic
i.
Button 5 of your push buttons on your controller is programmed to read
the voltage of the unit and give you a status report on your mobile device.
Nifty.
ii.
This amazing feature gives you some insight into whether your battery of
the unit is turned on, or if the permanent power is on and it tries to
indicate if your battery might also be charging while on perm power.
iii.
If you press button 5 while in App Select Mode, the controller will send a
text to your mobile with the battery info.
iv.
To see the text on your mobile device you simply need to be on your
Home screen in Android or any text app such as a Notepad.
v.
If you are on your normal home screen on your Android device, the
controller will simply open Google Search and send the text into the text
bar of Google Search. Seeing as it's trying to effectively type a message
for you to show the voltage.
vi.
A better option would be to simply open any notepad or text editor and
press the push button 5 on your unit while in App Select Mode. The
controller will send the text to your notepad and you can read the
message which contains the voltage and assumptions.
vii.
Fantastic
.
Copyright © Rally Rampage & Eugene Beetge 2022
Page 14
