RAMPAGE NAVIGATION HANDLEBAR CONTROLLER
Version 1.7.3
Led colours and flashing explained
The main LED in your unit is a two colour LED. Usually red and green. Using the colours
and flashing of the LED, it will indicate the different states of the unit and apps. By
understanding the LED cookies and flashing behaviour, you can use the LED as an
indicator of the mode the unit is in as well as the apps selected.
Here is a list of colours and flash codes.
● Green LED generally is to indicate Rider Mode.
● Red LED generally is to indicate App Select Mode.
● Green LED flashing shows the unit does not yet have a soft app selected yet. Turn the
mode switch to App Select Mode and select an app for the unit.
● While the red LED is on, indicating it is in App Select Mode, when you press push
buttons 1 to 4 on your controller the red LED will flash green the number of times, of
the app number selected. This is to indicate the unit understands the app you selected.
It's confirming the selection. Wait until it completes the flashing before proceeding.
After flashing green, it will return to solid red. You can then either select a different app
or press button 5 to check voltage or if you are satisfied with your selection, you can
flip the mode switch back to Rider Mode and get going.
● Whilst in App Select Mode, pressing button 5 which is voltage reading, the red LED will
rapidly flash green for 2 seconds indicating it is reading the voltage on the unit, and
typing the result back to your mobile device for you to read. Check your mobile device
as it will receive a text from your unit.
Copyright © Rally Rampage & Eugene Beetge 2022
Page 18
