be stopped, and the driver must press “Exit” on the
Uconnect display.
The driver will be prompted to choose either parallel or
perpendicular exit maneuver. After the driver chooses
an exit maneuver, the system will then prompt the
driver to choose an exit method.
NOTE:
If the system detects that it is unsafe to perform an
exit maneuver on either side, such as when the vehicle
is positioned too close to a curb or a wall, the exit
side selection will be greyed out. If exit procedures are
unavailable on both sides, the exit button will also be
greyed out.
The exit method options for parallel parking are Forward
Left and Forward Right.
Choose Exit Method
The exit method options for perpendicular parking are
Reverse Left and Reverse Right.
Choose Exit Method
After an exit maneuver method has been selected,
the driver will be instructed to remove hands from the
steering wheel and shift into REVERSE.
Remove Hands From Wheel And
Shift To Reverse — Parallel Parking
Remove Hands From Wheel And
Shift To Reverse — Perpendicular Parking
Release the steering wheel and use the brake and
accelerator pedals and gear selector as instructed,
while the system handles the steering automatically for
exiting the parking space. If the driver touches or holds
the steering wheel (voluntarily or not) during the exit
maneuver, the maneuver will be interrupted.
The Semi-Automatic maneuver ends when the display
shows the message of a completed maneuver. At the
end of the maneuver, the system gives vehicle control
back to the driver.
BASE ACTIVE DRIVING ASSIST SYSTEM —
IF EQUIPPED
O
PERATION
The Active Driving Assist (ADA) system is combined with
the Adaptive Cruise Control (ACC) system, and centers
STARTING AND OPERATING 165
4
