D
ISPLAY
M
ENU
I
TEMS
Push and release the up
or down
arrow button
until the desired selectable menu icon is highlighted
in the instrument cluster display.
Speedometer
Push and release the up
or down
arrow button
until the speedometer menu item is highlighted in the
instrument cluster display. Push and release the OK
button to cycle the display between mph and km/h.
Speedometer options are as follows:
●
Analog
●
Digital
Driver Assist
The Driver Assist menu displays the status of the ACC
and Active Lane Management systems.
Push and release the up
or down
arrow button
until the Driver Assist menu is displayed in the
instrument cluster display.
Adaptive Cruise Control (ACC) Feature
The instrument cluster display displays the current ACC
system settings. The information displayed depends on
ACC system status.
Push the ACC on/off button (located on the steering
wheel) until one of the following displays in the
instrument cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read “Adaptive
Cruise Control Off.”
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed setting has
not been selected, the display will read “Adaptive Cruise
Control Ready.”
Push the SET + or the SET- button (located on the
steering wheel) and the following will display in the
instrument cluster display:
ACC SET
When ACC is set, the set speed will display in the
instrument cluster.
The ACC screen may display once again if any ACC
activity occurs, which may include any of the following:
●
Distance Setting Change
●
System Cancel
●
Driver Override
●
System Off
●
ACC Proximity Warning
●
ACC Unavailable Warning
Active Lane Management — If Equipped
The instrument cluster display displays the current
Active Lane Management system settings. The
information displayed depends on Active Lane
Management system status and the conditions that
need to be met
Active Driving Assist System — If Equipped
The instrument cluster display displays the current
ADAS system settings. When ADAS is engaged a
steering wheel icon will appear on the instrument
cluster display below the host vehicle
.
Vehicle Info
Push and release the up
or down
arrow button
until the Vehicle Info menu icon is displayed in the
instrument cluster display. Push and release the left
or right
arrow button to scroll through the information
submenus and push and release the OK button to
select or reset the submenus.
VEHICLE INFO — BASE CLUSTER
●
Fuel Economy
○
Average FE
○
Current FE
○
Range to Empty
●
Gauge Summary
○
Coolant Temp
○
Trans Temp
○
Oil Temp
○
Oil Pressure
●
Coolant Temperature — If Equipped
●
Trans Temperature
●
Oil Temperature
●
Oil Pressure — If Equipped
●
Oil Life
●
Oil Level — If Equipped
●
Battery Voltage — If Equipped
●
Tire Pressure Monitor System
●
Stop/Start — If Equipped
●
Drive Modes — If Equipped
●
Air Suspension — If Equipped
GETTING TO KNOW YOUR INSTRUMENT PANEL 107
3
●
Engine Hours — If Equipped
