VEHICLE INFO — PREMIUM CLUSTER
●
Fuel Economy
○
Average FE
○
Current FE
○
Range to Empty
●
Gauge Summary
○
Coolant Temperature — If Equipped
○
Trans Temperature
●
Oil Summary
○
Oil Temperature
○
Oil Life
○
Oil Pressure — If Equipped
●
Oil Level — If Equipped
●
Tire Pressure
●
Stop/Start — If Equipped
●
Terrain Status — If Equipped
○
Drive Mode — If Equipped
○
Air Suspension Status — If Equipped
●
Engine Hours — If Equipped
Fuel Economy
Push and release the up
or down
arrow button
until the Fuel Economy menu item is highlighted in the
instrument cluster display. Push and hold the OK button
to reset Average Fuel Economy.
●
Current Fuel Economy
●
Average Fuel Economy
●
Range To Empty
Stop/Start — If Equipped
Push and release the up
or down
arrow button
until the Stop/Start icon/title is highlighted in the
instrument cluster display. The screen will display the
Stop/Start status.
Off Road – If Equipped
Push and release the up
or down
arrow button
until the Off Road menu icon is displayed in the
instrument cluster display. Push and release the
left
or right
arrow button to scroll through the
information submenus.
●
Vehicle Dynamics
○
Front Wheel Angle: displays the graphical and
numerical value of calculated average front wheel
angle from the steering wheel orientation.
○
Transfer Case Lock Status (If Equipped): displays
“Lock” graphic only during 4WD High, 4WD Auto,
4WD Low status.
○
Axle Lock Status (If Equipped): displays front and
rear or rear only axle locker graphic.
●
Pitch And Roll
○
Displays the pitch and roll of the vehicle in the
graphic with the angle number on the screen.
NOTE:
When vehicle speed becomes too high to display
the pitch and roll, “- -” will display in place of the
numbers, and the graphic will be grayed out. A message
indicating the necessary speed for the feature to
become available will also display.
Trip Info
Push and release the up
or down
arrow button
until the Trip menu item is highlighted in the instrument
cluster display. Push and release the right
or left
arrow button to enter the submenus of Trip A and Trip B.
The Trip A or Trip B information will display the following:
●
Distance
●
Average Fuel Economy
●
Elapsed Time
Push and hold OK button to reset all information.
Navigation — If Equipped
Push and release the up
or down
arrow button
until the Navigation display title is highlighted in the
instrument cluster display, “Hold OK to Start Route” will
display when no active route is set. “Hold OK to Cancel
Route” will display when active route is set. Use the
left
or right
arrow button to zoom in or out on the
display
Trailer Tow — If Equipped
Push and release the up
or down
arrow button
until the Trailer Tow menu item is highlighted in
the instrument cluster display. Push and release the
right
or left
arrow button to cycle through the
following trailer tow information:
●
Trip (Trailer Specific) Distance: Push and hold the OK
button to reset the distance.
●
Integrated Trailer Brake Module (ITBM):
○
Braking Output
○
Trailer Type
108 GETTING TO KNOW YOUR INSTRUMENT PANEL
○
ITBM Gain
