I
LLUMINATED
V
ANITY
M
IRROR
— I
F
E
QUIPPED
To access an illuminated vanity mirror, flip down one of
the visors and lift the cover.
Lift Cover For Illuminated Mirror
Slide-On-Rod Features Of Sun Visor — If
Equipped
The sun visor Slide-On-Rod feature allows for additional
flexibility in positioning the sun visor to block out the
sun.
1. Fold down the sun visor.
2. Unclip the visor from the corner clip.
3. Pivot the sun visor toward the side window.
4. Extend the sun visor for additional sun blockage.
Slide-On-Rod Extender
NOTE:
The sun visor can also be extended while the sun visor
is against the windshield for additional sun blockage
through the front of the vehicle.
O
UTSIDE
M
IRRORS
The outside mirror(s) can be adjusted to the center of
the adjacent lane of traffic to achieve the optimal view.
NOTE:
If your vehicle is equipped with puddle lamps under
the outside mirrors, they can be turned off through the
Uconnect system
.
WARNING!
Vehicles and other objects seen in an outside convex
mirror will look smaller and farther away than they
really are. Relying too much on side convex mirrors
could cause you to collide with another vehicle or
other object. Use your inside mirror when judging the
(Continued)
WARNING!
size or distance of a vehicle seen in a side convex
mirror.
Trailer Tow Telescoping Mirrors
Your vehicle may be equipped with manual or power
trailer telescoping mirrors. These mirrors are designed
with an adjustable mirror head that can be extended
when trailering to provide a greater vision range when
towing extra-wide loads.
Power Telescoping Mirrors
The Power Telescoping Mirror Switch is located on the
door trim panel, above the power mirror controls. The
switch enables the driver to extend or retract the mirror
head.
Power Telescoping Mirror Switch
To adjust the outside mirrors, push the Telescoping
Mirror Switch. Pressing left on the directional pad
extends the mirrors outward, pressing right on the
directional pad retracts the mirrors back to the inward
position.
GETTING TO KNOW YOUR VEHICLE 43
2
