8. Holding the bumper, push the fully released latch
to the center and push up. Push the handle firmly,
locking it into the stowed position. Repeat Steps 2
& 3 for the opposite side latch.
Hold The Bumper And Push The Handle Up
9. With two people, remove the cover.
T
RI
-F
OLD
T
ONNEAU
C
OVER
I
NSTALLATION
To install the Tonneau Cover follow these steps:
1. Position the Tonneau Cover on the truck bed and
center using the locating bumpers.
2. Locate the front pair of Tonneau Cover latches on
the underside of the Cover. Slide the locking lever
toward the inside of the truck bed and release the
latch from the stowed position, and pull the handle
downward into the released position. Do this for
both the left and right side.
Location of Front Latches
Slide Locking Lever Towards Inside Of Truck
Unlatching Latch
Released Position
96 GETTING TO KNOW YOUR VEHICLE
