RAM 1500 CLASSIC 2020 Owner'S Manual Download

Page: 320 / 360

318

MULTIMEDIA

System Information — If Equipped

SAFETY AND GENERAL INFORMATION

AFETY

UIDELINES

Ensure that all persons read this manual carefully

before using the system. It contains instructions on

how to use the system in a safe and effective

manner.
Do NOT attach any object to the touchscreen.

Doing so can result in damage to the touchscreen.
Please read and follow these safety precautions.

Failure to do so may result in injury or property

damage.



Glance at the screen only when safe to do so. If

prolonged viewing of the screen is required,

park in a safe location and set the parking

brake.



Stop use immediately if a problem occurs.

Failure to do so may cause injury or damage to

the product. Return it to an authorized dealer for

repair.



Ensure the volume level of the system is set to a

level that still allows you to hear outside traffic

and emergency vehicles.

Clear Personal Data

Yes

Cancel

NOTE:

When the “Clear Personal Data” feature is selected it will remove all personal data including Bluetooth® devices and presets.

Setting Name

Selectable Options

After pressing the System Information button on the touchscreen, the following setting will be available:

Setting Name

Selectable Options

Software License

System Software Information Screen

NOTE:

When the “Software License” feature is selected, a “System Software Information” screen will appear, displaying the system software version.

WARNING!

ALWAYS drive safely with your hands on the

steering wheel. You have full responsibility and

assume all risks related to the use of the

Uconnect features and applications in this

vehicle. Only use Uconnect when it is safe to do

so. Failure to do so may result in an accident

involving serious injury or death.

20_DS_OM_EN_USC_t.book Page 318

Summary of Contents for 1500 CLASSIC 2020









































































































































































































































































































































































Search results

Summary of Contents for 1500 CLASSIC 2020

Reviews:

Related manuals for 1500 CLASSIC 2020

Brands by name

Popular brands

RAM 1500 CLASSIC 2020, Owner'S Manual

Search results

Summary of Contents for 1500 CLASSIC 2020

Reviews:

Related manuals for 1500 CLASSIC 2020

Brands by name

Popular brands