SAFETY
130
Right Or Left Outboard Seats:
1. Raise the head restraint and reach
between the rear seat and rear glass to
access the tether strap loop.
Head Restraint In Raised Position
Tether Strap Loop With Center Head Restraint In
Raised Position
2. Place a child restraint on the seat and
adjust the tether strap so that it will
reach over the seat back, under the head
restraint, through the tether strap loop
behind the seat and over to the tether
strap loop behind the center seat.
3. Pass the tether strap hook under the
head restraint behind the child seat,
though the tether strap loop behind the
seat and over to the center tether strap
loop.
Tether Strap Through Outboard Tether Strap
Loop
4. Attach the hook to the center tether strap
loop (see diagram). Tighten the tether
strap according to the child seat manu
-
facturer’s instructions.
Tether Strap Through Outboard Tether Strap
Loop And Attached To Center Tether Strap Loop
NOTE:
If there are child seats in both of the
outboard (left and right) seating positions,
the tether strap hooks of both child seats
should be connected to the center tether
strap loop. This is the correct way to tether
two outboard child seats.
2019_RAM_2500_3500_UG_USA=GUID-8BBFE451-BF24-4E82-808A-AE2460D39A05=1=en=.book Page 130
Summary of Contents for 2500 2019
Page 1: ...2019 USER GUIDE RAM 2500 3500...
Page 330: ......
