STARTING AND OPERATING
188
8. Start the engine.
9. Press and hold the brake pedal.
10.Release the parking brake.
11.Shift the transmission into gear, release
the brake pedal, and check that the
vehicle operates normally.
NOTE:
With electronic shift transfer case:
Steps 3 and 4 are requirements that must
be met before pushing the button to shift
out of NEUTRAL (N), and must continue
to be met until the shift has been
completed. If any of these requirements
are not met before pushing the button or
are no longer met during the shift, the
NEUTRAL (N) indicator light will flash
continuously until all requirements are
met or until the button is released.
The ignition must be in the ON/RUN mode
for a shift to take place and for the posi
-
tion indicator lights to be operable. If the
ignition is not in the ON/RUN mode, the
shift will not take place and no position
indicator lights will be on or flashing.
A flashing NEUTRAL (N) position indi
-
cator light indicates that shift require
-
ments have not been met.
2019_RAM_2500_3500_UG_USA=GUID-8BBFE451-BF24-4E82-808A-AE2460D39A05=1=en=.book Page 188
Summary of Contents for 2500 2019
Page 1: ...2019 USER GUIDE RAM 2500 3500...
Page 330: ......
