RAM CHASSIS CAB 2024 Owner'S Manual Download

Page: 194 / 360

NOTE:

The radio unit is acting as the amplifier for audio output
from the Auxiliary device. Therefore, if the volume con-
trol on the Auxiliary device is set too low, there will be
insufficient audio signal for the radio unit to play the
music on the device.

Seek Up

/Seek Down

In USB Mode, press the Seek Up button on the touch-
screen for the next selection on the USB device. Press
and release the Seek Down button on the touchscreen
to return to the beginning of the current selection, or to
return to the beginning of the previous selection if the
USB device is within the first three seconds of the cur-
rent selection.

In Bluetooth® Mode, press and release the Seek Up
button on the touchscreen for the next selection on the
Bluetooth® device. Press and release the Seek Down
button on the touchscreen to return to the beginning of
the current selection, or return to the beginning of the
previous selection if the Bluetooth® device is within the
first second of the current selection.

Browse

In USB Mode, press the Browse button on the touch-
screen to display the browse window. In USB Mode, the
left side of the browse window displays a list of ways
you can browse through the contents of the USB device.
If supported by the device, you can browse by Folder,
Artist, Playlist, Album, Song, etc. Press the desired but-
ton on the touchscreen on the left side of the screen.
The center of the browse window shows items and their
sub-functions, which can be scrolled through by press-
ing the Up and Down buttons to the right. The TUNE/
SCROLL knob can also be used to scroll.

On the Uconnect 3 With 5-inch Display, rotate the
ENTER/BROWSE button on the faceplate or press the
Browse button on the touchscreen to scroll through and

select a desired track on the device. Press the Exit but-
ton on the touchscreen if you wish to cancel the Browse
function.

Media Mode

In USB Mode, press the Media button on the touch-
screen to select the desired audio source: USB.

In Bluetooth® Mode, press the Media button on the
touchscreen to select the desired audio source:
Bluetooth®.

In AUX Mode, press the Media button on the touch-
screen to select the desired audio source: AUX.

Repeat

In USB Mode, press the Repeat button on the touch-
screen to toggle the repeat functionality. The Repeat
button on the touchscreen is highlighted when active.
The Radio will continue to play the current track,
repeatedly, as long as the repeat is active. Press the
Repeat button again to enter Repeat All. The radio will
continue to play all the current tracks, repeatedly, as
long as the repeat function is active. To cancel Repeat,
press the Repeat button a third time.

Shuffle

In USB Mode, press the Shuffle button on the touch-
screen to play the selections on the USB device in ran-
dom order to provide an interesting change of pace.
Press the Shuffle button on the touchscreen a second
time to turn this feature off.

Audio

Audio settings can be accessed by pressing the Audio
button

page 185.

Info

In USB Mode, press the Info button on the touchscreen
to display the current track information. Press the Info
or X button on the touchscreen a second time to cancel
this feature.

Tracks

In USB Mode, press the Tracks button on the touch-
screen to display a pop-up with the Song List. The song
currently playing is indicated by an arrow and lines
above and below the song title. When in the Tracks List
screen you can rotate the TUNE/SCROLL knob to high-
light a track (indicated by the line above and below the
track name) and then push the ENTER/BROWSE knob
to start playing that track.

In Bluetooth® Mode, if the Bluetooth® device supports
this feature, press the Tracks button on the touch-
screen to display a pop-up with the Song List. The cur-
rently playing song is indicated by a red arrow and lines
above and below the song title.

Pressing the Tracks button on the touchscreen while
the pop-up is displayed will close the pop-up.

MEDIA VOICE COMMANDS

Uconnect offers connections via USB, Bluetooth®, and
auxiliary (AUX) ports. Voice operation is only available
for connected USB and AUX devices.

Push the VR button

located on the steering wheel.

After the beep, say one of the following commands and
follow the prompts to switch your media source or
choose an artist:

•

“

Change source to

Bluetooth®”

•

“

Change source to

AUX”

•

“

Change source to

USB”

•

“

Play artist

Beethoven”; “

Play album

Greatest

Hits”; “

Play song

Moonlight Sonata”; “

Play genre

Classical”

Did You Know:

Press the Browse button on the touch-

screen to see all of the music on your USB device. Your
Voice Command must match exactly how the artist,
album, song, and genre information is displayed.

192

MULTIMEDIA