17
Connecting the cooktop to 220V AC power supply
This cooktop must be connected to the mains power supply only by a certified/licensed
technicians.
Before connecting the hob to the mains power supply, check that:
The 220-240 AC voltage corresponds to the value given in the rating plate.
The power cable sections can withstand the load specified on the rating plate.
To connect the cooktop to 220V AC power supply, do not use adapters, reducers,
or branching devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so
that its temperature will not exceed 75
℃ at any point.
The power supply must be connected in compliance with the relevant standard. The
method of connection is shown below.
1.
Power cable replacement must be conducted by a certified/licensed technician.
2.
The cable must not be bent or compressed.