background image

 

GENERAL INFORMATION

 

 

This appliance is designed for domestic household use. The User Manual contains 
important product safety & installation information.   

 

Your safety is of the utmost importance. Please ensure you read this booklet before 

attempting to install or use the appliance, and contact RambleWood Green if you 
have any question. 

                           

                                       

 

Safety 

Installation Guide 

 

Read these instructions carefully before installing or using this appliance. 

 

No combustible material or products should be placed on this appliance at any time. 

 

Please make this information available to the person responsible for installing the 
appliance as it could reduce your installation costs. 

 

In  order  to  avoid  a  hazard,  this  appliance  must  be  installed  according  to  these 
instructions for installation. 

 

This appliance is to be properly installed and earthed only by a certified technician 
per state/city safety code. 

 

It is recommended to connect the unit to a circuit which incorporates an isolating 
switch providing full disconnection from the power supply. 

 

Failure to install the appliance correctly could void any warranty or liability claims. 

 

Electrical Shock Hazard 

 

Disconnect the appliance from electricity before carrying out any maintenance. 

 

Connection to a Ground / Earth wiring is mandatory. 

 

Alterations to the domestic wiring system must be made by a qualified electrician. 

Summary of Contents for EC2-23



















Reviews: