IMPORTANT
Attention !!!
TEL 400 power supply uses a three wire power cord (2 poles + earth). Earth should be connected to the power net earth.
[
[
Check the earth quality before use.
[
In case of hum when connected to other equipment, never disconnet the earth, use transformers for
isolation from mains.
[
In case of hum when connected to other equipment, never disconnet the earth, use transformers for
isolation from mains.
[
Avoid high temperature, rain, snow and moisture exposure
TEL 400 complies to :
EN60065, EN55013, EN55020, EN60555-2, et EN60555-3, from 73/23/EEC, 89/336/EEC et 93/68/EEC.
Never use this equipment without an earth connection
TEL 400
25
Supply :
230 Volts +/- 10 %
50/60 Hz
Power :
12 W
Size
:
483 x 44 x 230 mm
Weight
:
4 kg
Inputs
Connector
Outputs
Connector
Type
Impedance
Nominal Level
Maximum Level
Send
Retun
Phone line
Phone line
XLR et
Sub-D 15 pts
XLR et
Sub-D 15 pts
Sub-D 15 pts
RJ 11
Standby
XLR
Balanced
Balanced
Impedance
Type
Balanced
Balanced
Balanced
15 KOhms
600 Ohms
15 KOhms
Impédance
100 Ohms
600 Ohms
+6 dBu / 1,55 V
- 4 dBu / 490 mV
+26 dBu / 15,4 V
-10 dBu / 245 mV
-26 dBu / 38 mV
-2 dBu / 620 mV
+6 dBu / 1,55 V
-4 dBu / 490 mV
+26 dBu / 15,4 V
+6 dBu / 1,55 V
-10 dBu / 245 mV
+26 dBu / 15,5 V
-6 dBu
with limiter
Send bandwidth : 300 Hz to 3500 Hz at -3 dB.
Return bandwidth : 200 Hz to 3500 Hz at -3 dB.
Nominal level
Min Level
Maxi Level
INFORMATIONS
SPECIFICATIONS
Summary of Contents for TEL 400
Page 2: ...TEL 400 2 ...
Page 14: ...TEL 400 14 ...