Attach Insert Channels to Posts/Walls
Place insert channel against post/wall 1” from the floor.
Plumb and level insert channel. Attach with supplied
screws through holes in insert channel. (Note: if you
are attaching to a concrete surface, 1/4” Tapcons may be
used as a substitute fastener.)
Tuscany Stall Front Installation Instructions
1"
Customer Supplied Wood Posts
Slide Panels onto Insert Channels
Slide the right and left Tuscany stall front panels over the insert channels
and adjust the width between the door posts to achieve 48”.
48”
SS1 Screw
(Wood Posts/Walls)
Clip Screw
(Metal Posts/Walls)
