COPYRIGHT © 2013 SANDVIK MINING AND CONSTRUCTION OY
Page 70 - Maintenance
Replacing crushing plate D-JAW
RD2019 A-JAW, D-JAW, S-JAW, M-JAW
8. REPLACING CRUSHING PLATE D-JAW
TIGHTENING TORQUE FOR PULVERIZING PLATE
REMOVAL OF PULVERIZING PLATE
Warning! Support the crusher jaw to prevent it from closing unexpectedly
during maintenance.
A used pulverizing plate can be recycled. Contact your dealer for more
information about local regulations of recycling.
1. Position the attachment on level ground.
2. Support the crusher jaws.
3. Clean the pulverizing plate and the base.
4. Open and remove screws, lock washers and nuts.
Item
Tightening torque
Pulverizing plate screws (B)
690 Nm (509 lbf ft)