14
Ramp Networks, Inc.
WebRamp M3 Quick Start
To setup the rest of the computers on your network, verify you’ve
completed the following steps on each computer:
1
A 10Base-T Ethernet network card is installed and configured, and an
Ethernet cable connects the Ethernet card to the WebRamp M3
Ethernet port.
2
TCP/IP is installed and configured to obtain IP address automatically
(see
Basic Networking
for additional information).
3
Computer has restarted to update the network settings.
4
A web browser is installed and the WebRamp M3 connects to the
Internet.
If you have any problems connecting the computers on your network to
the Internet, see
Frequently Asked Questions
.
Adding Modems
Follow these steps to add a modem:
1
Connect the additional modem to Modem Port 2. Make sure you have
a separate telephone line and ISP account for the second modem.
See
Step 1. Connect the WebRamp M3
for additional information.
2
Start a web browser and type
192.168.1.1
to access the WebRamp
M3 Configuration page (or select
Configuration
from your Bookmarks
if you saved the location).
3
Click
Add Modem
and then click
Modem 2
.
4
Complete the modem and ISP information and then select
Dynamically select second and third modem when required
for
modem multiplexing.
5
Click
Finish
to complete the addition of modem 2.
To add a third modem to your WebRamp M3, simply repeat the steps
above.
