background image

Angle Grinder 18V 

Owners Manual

- 016 -

 English | 33

Bosch Power Tools

1 609 92A 47F | (14.11.17)

Recommendations for Optimal Handling of the Battery
Protect the battery against moisture and water.
Store the battery only within a temperature range between 

–20 °C and 50 °C. As an example, do not leave the battery in

the car in summer.
Occasionally clean the venting slots of the battery using a soft, 

clean and dry brush.
A significantly reduced working period after charging indi-

cates that the battery is used and must be replaced.
Observe the notes for disposal.

Maintenance and Service

Maintenance and Cleaning

Before any work on the machine itself (e. g. mainte-

nance, tool change, etc.) as well as during transport 

and storage, remove the battery from the power tool. 

There is danger of injury when unintentionally actuating 

the On/Off switch.

For safe and proper working, always keep the machine 

and ventilation slots clean.

Please store and handle the 

accessories

 carefully.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare 

parts. 

ramsetreid Postal:

Australia:

P.O. Box 192, Croydon, Victoria 3136

1 Ramset Drive, Chirnside Park, Victoria 3116

Customer Service Center Inside Australia: 

   

Phone: 1300 780 063

Fax: 1300 780 064

New Zealand:

Inside New Zealand:

Phone: 0800 RAMSET (726738)

Fax: (0800) 428570

Outside AU and NZ:

Phone: +61 3 9726 62

www.ramset.com.au

Transport

The contained lithium-ion batteries are subject to the 

Danger-ous Goods Legislation requirements. The user can 

transport the batteries by road without further 

requirements.

When being transported by third parties (e.g.: air transport or 

forwarding agency), special requirements on packaging and 

labelling must be observed. For preparation of the item being 

shipped, consulting an expert for hazardous material is re-

quired.
Dispatch batteries only when the housing is undamaged. 

Tape or mask off open contacts and pack up the battery in 

such a manner that it cannot move around in the packaging.

OBJ_BUCH-3456-001.book  Page 33  Tuesday, November 14, 2017  1:42 PM

1 609 92A 47F | (14.11.17)

Bosch Power Tools

34 | 

Please also observe possibly more detailed national regula-
tions.

Disposal

The machine, rechargeable batteries, accessories 

and packaging should be sorted for environmental-

friendly recycling.

Do not dispose of power tools and batteries/re-

chargeable batteries into household waste!

OBJ_BUCH-3456-001.book  Page 34  Tuesday, November 14, 2017  1:42 PM

Summary of Contents for CBAGR18





















Reviews: