Fuel Cells and Batteries
Fuel Cells
• The fuel cell must be used at
temperatures between -5° C
(23° F) and 49° C (120° F).
• At the beginning of each fastening
cycle, a measured amount of gas
is injected into the combustion
chamber.
• The fuel cell is designed with an
internal reservoir that is under
pressure by a propellant.
• When the fuel cell is empty, a
small amount of propellant
remains inside the cell.
• For safety and proper tool functioning
it is important that only Ramset
supplied fuel cells be used in the
R150 tool.
Batteries
• The battery will become discharged
even if the tool is not being used.
• Remove the battery from the tool
when the tool is not to be used or
put it in the “no contact” position
in the tool as shown on page 5.
• Recharge the battery if it has not
been used for a long period of time.
• Batteries are supplied in an
uncharged condition so fully
charge them for first time use.
• Do not recharge batteries until
they are fully discharged.
• It takes about 1 hour to recharge
a battery.
• Use only batteries and chargers
supplied by Ramset.
• Battery
Capacity—Maximum
1200 shots.
Ramset Fuel Cell
Ramset 6 V. Battery
SAFETY INSTRUCTIONS
DANGER
4
SAFETY INSTRUCTIONS
DANGER
