RAMSET RAM 30, Instruction Manual

23

www.ramsetinc.com

R

AM

 3

0

Opening the way…

Important information for the homeowner

Ask your technician about all the features of our new Ramset operator.

Safety devices, such as reverse loops, phantom loops, photo eyes, or miller edges must be
installed on your gate before the operator may be used.  Ask your technician which safety devices best
suit your safety needs.

Read your warranty certificate and fill out your warranty extension card.  Return the warranty
card, via certified mail, to Ramset within 90 days of purchase:

Ramset Automatic Gate Services, Inc.
9116 De Garmo Ave.
Sun Valley, CA. 91352

Never let children operate or play with gate controls.  Keep the controls away from children.

The entrance is for vehicles only.  Pedestrians should use a separate entrance.

Always keep people, children and objects away from the gate while the gate is in operation.  No
one should cross the area of a moving gate.

Use the emergency release only when the gate is not moving.  Make sure when using the foot
release or hand crank, the circuit breaker  for the operator is turned off.

Have the technician give you a demonstration of how to use the emergency release.

Keep gates properly maintained.  Have a qualified gate technician service the gate operator and
gate hardware every six months to a year.  This includes checking of safety devices, E.R.D. and
battery back up systems.

Warning signs must be placed on every gate in a highly visible area.

To reset the audible alarm on the gate operator you must turn the circuit breaker for the operator
off for approximately 10 seconds, then back on.  An exterior switch or button can also be
installed on the operator to shut off the audible alarm.

Always keep a good relationship  with your technician and keep his or her number handy
for future maintenance or emergencies.

Ramset wishes to thank you for trusting us

to meet your gate operator needs.