SBRGB
•
10
SBRGB ASSEMBLY
Use the boxes to check off your progress as you go along.
Check all received parts against the Parts list. The parts list describes the
various markings that may be found on the kit parts.
In the case of a surface mount component, INSTALL means these steps:
•
Dab a small amount of solder on one pad of the PC board for the
component you wish to install. Usually choose pin 1.
•
Locate the appropriate part from those packed in the kit.
•
Use tweezers to pick up the part by grabbing it across the body, not the
solder connections.
•
Place the part in the assembly location as noted by the silk-screen on the
top layer of the board (the bottom side has no writing on it). Use one hand
to hold the tweezers and part in place.
