background image

 

  

Ramsey Winch Company 

OWNER’S MANUAL 

Model REP 9.5e 

Front Mount Electric Winch 

12 volt available 

Layer of Cable 

  

  

First Layer 
Line Pull 

(lbs) 

NO 2,000 4,000 6,000 8,000 9,500 

Rated Line Pull Per 
Layer 

(lbs) 9,500 7,700 6,500 5,700    

(kg) 

LOAD 900 1,810 2,720 3,620 4,310 

(kg) 4,310 3,490 2,950 2,590    

Line Speed  
First Layer 

(FPM) 20  16  11  7  5  3 

Cumulative Cable  
Capacity Per Layer 
5/16" (8mm) dia. Cable 

(ft)* 

15 35 60 95   

(MPM) 9.1  4.8  3.3  2.1  1.5  0.9 

(m)* 4  10  18  28    

Amp Draw 

  

12V 99 170 250 315 370 420 

* Depends on cable being uniformly wound onto drum. Ramsey performance data is compiled from actual winch testing.  

Congratulations 

You have purchased the finest winch available in its service 

class. The REP 9.5e winch features a highly efficient 3 stage 
planetary gear set. It utilizes a series-wound D.C. motor. A 
safe positive clutch allows free spooling for quick cable de-
ployment. An automatic load-holding brake is designed to 
hold the full rated capacity of the winch.  
This winch was designed and manufactured to provide you 
with the utmost in utility. As with any device that combines 
power and movement in its use, there are dangers if improp-
erly used. At the same time, there are easier and faster ways 
for getting the job done if certain precautions are taken first.  
Please read this manual carefully. It contains useful ideas in 
obtaining the most efficient operation from your Ramsey 
Winch and safety procedures you need to know before be-
ginning use. When you follow our guidelines for operation, 
your Ramsey Winch will give you many years of satisfying 
service. Thank you for choosing Ramsey. You will be glad 
you have one working for you. 

 

Please Note: The Ramsey REP 9.5e winch is designed 
for front mount vehicle use. It is not designed for and 
should not be used in industrial applications (car haul-
ers/carriers, wreckers, hoisting, etc.), and Ramsey 
does not warrant it to be suitable for such use. Ramsey 

makes a separate, complete line of winches for indus-
trial/commercial use. Please contact the factory for 
further information. 

Contents 

Safety Precautions......................................................2 
Tips for Safe Operation ...............................................2 
Techniques of Operation .............................................3 
Installation.............................................................. 4-7 
Electrical Connections & Operations............................5 
Maintenance...............................................................8 
Operating Instructions.................................................8 
Trouble Shooting Guide...............................................9 
Winch Parts List ................................................. 10-11 
Warranty .....................................................Back Cover 

CAUTION: 

Read and understand this manual before installation and operation of winch. See Safety Precautions. 

Инструкция RAMSEY REP 9.5e

www.bigfoottrade.kz

Summary of Contents for REP 9.5e













Reviews: