4
Speed Control Knob is as follows (figure 4).
Pulse position
Stop position
Low speed
High speed
Fig.4
6. Do not run the appliance for more than 3 minutes per time, and only
wait until the unit is cooled to room temperature before performing
next operation cycles.
7. Turn the Speed Control Knob to 0 Position once the mixture has been
blended to your desired consistency.
8. Remove the Jar from the Motor Unit (by turning the jar anti-clockwise),
carefully take down the Jar Cover, then pour and serve.
CLEANING AND MAINTENANCE
The Auto Clean feature can clean the blender and blade assembly easily,
rapidly in complete safety.
-Pour a little warm soapy water into the jar and turn the Speed Selector
to P position for a few seconds. Then turn back to the 0 position.
-Remove the jar and rinse under running water.
-Wiping the outer surface of Motor Unit with a damp cloth, do not use
Turn the Speed
Control knob to the
P position to
accelerate the
process, stop it by
turning it to the 0
position.
