When using the bottles holding ultra-pure water, distilled water or space water with the
so-called clever lid, tear off the hygienic label on the lid, place the bottles at the intake, then
the core of water guard will automatically open the valve and seal it in the meantime, when
moving the bottles, the valve will also seal automatically to avoid any possible oozing.
Push the hot water faucet, bubbles are generated inside the bottle, indicating that water is
flowing into hot water and cold water tanks, keep pressing the hot water valve until water
flows out, dispensing cold water required need no particular adjustment.
Do not connect the electrical power plug, until water comes out of the hot water faucet.
After plug, the yellow LED indicator will be on indicating the power is “ON”.
Turn on the heating switch, the red LED indicator will be on and the heating system starts
working. When the hot water comes up to 85-95
℃
or so, the red light goes off, the heating
system stops working. The machine turns to the warm-keeping status. When the hot water
temperature is lower than 80
℃
,the heating system will resume working automatically.
Turn on the cooling switch, the green LED indicator will be on and the cooling system starts
working. When the cold water falls down to 5-10
℃
, the green light goes off, the cooling
system stops working. The machine turns to the cold-keeping status. When the cold water
temperature goes up to a set degree, the cooling system will resume working automatically.
Since the temperature has already been adjusted before leaving the factory, it is unnecessary
for customers to set the temperature.
Turn the heating and cooling switches on. Then the heating and cooling processes start
working together.
If the device is not applied for a long time, after the hot water cools down, please remove the
power plug and revolve the drain cap to drain the rest water in the hot tank then tighten the
cap. Open the cold water faucet to drain the rest water in the cold tank.
If there is no water flowing from cooling faucet, please shut down the cooling switch until
there is water flowing out.
If you do not plan to use the water heating function for more than three days, we strongly
recommend that you turn off the hot water function.
TAKING DISPENSER OUT OR SERVICE
If the water dispenser will not be used for a long period of time, unplug the power supply
cord.
Turn off the hot water.
Drain the water through the faucets.
Drain the water from tanks by drainage hole from the back of the dispenser.
CAUTION
Do not use the bottle with any crack, leakage or holes.
The back of the product should be put in shady places and kept away from wall and
high-temperature elements. Please also put the product away from TV, video, or other
valuables.
Do not turn on “heating” switch until water comes out of hot water faucet to prevent any
damage on the heating tube.
During operation keep it beyond the children to avoid scald.
Never turn on the heating switch when there is no water.
