User Manual
21
Enter into [Language] menu to select the language you want to use
on the DVR (shown as Picture 5-40), and then click [APPLY] button.
The selection will be available after system Auto restarts.
Enter into [System Information] menu to view system info,
including Device type, Software (firmware) version, IE version and
MAC address etc.
When connecting multiple DVRs to the same local area network
environment, you need to change MAC address for each DVR
respectively; otherwise, you may not connect these DVRs to network.
When you set Password Enabled to “ON” (shown as Picture
5-38), you can setup a user password and administrator password
respectively. The password supports up to 6 characters.
The password defaulted by system is 1
23456.
Video System:
allow you set Camera system (PAL, NTSC).
VGA Resolution:
include five options - 1280
×
1024
、
1024
×
768
、
800
×
600 and 1440
×
900.
OSD Device:
allow you select video output device, Main output and
VGA.
User can hold pressing [Rew] button on the front panel to
convert output device quickly.
Poll time
：
allow you select sequence time between from 5s and
300s.
Picture 5-38
Picture 5-39
（
a
）
Picture 5-39
（
b
）
5.2.7.3 Video/Audio Setup
Click [Main Menu System Video/Audio] to setup Video and Audio parameters shown as Picture 5-39 (a).
5.2.7.4 Language
5.2.7.5 System Information
Click the [Volume] and/or [Margin] options on the right-bottom
corner of the Video/Audio screen to adjust the volume and/or margin
respectively. Details please kindly find the Picture 5-39 (b).
Picture 5-40
Picture 5-41
