User Manual
23
5.4 Record search
You could enter into [Record Search] menu from Pop-up menu conveniently and quickly and search/playback
the record histories.
We introduced Record search details previously in section 5.2.4.
5.5 PTZ Control
Open auto cruise function on PTZ setting menu if you want to setup cruise function (system default: on),
and set up cruise channel, cur point and total quantity and stop time etc.
Channel select:
select one channel with PTZ camera
Total:
set up pre-set bit quantity
Pre:
indicates starting point cruised. System default point is 01.
STP
：
sets the stop time at each point
GOTO
：
allow you go to a specific preset point.
SET
：
allow you set a set of specific preset points of a PTZ camera.
1. Select a camera you desire to set a preset point;
2. Adjust the camera in a desired direction
3. Click [Set] to set the point as preset point
4. Click [Save] to save the preset point
5. Follow the above step to add one more preset point.
CLR:
allow you delete one selected preset.
Note
: Up to 255 preset bits for the DVR can be stored. However, actual preset quantity differs depending on
PTZ performance.
5.6 Record
Enter into Pop-up menu to select the [Record] option. Now you can start manual record function, or you
also can click [Rec.] button on the Front panel or Remote controller to activate manual record. Please stop
record manually once you activate manual record.
5.7 Stop Record
To stop record quickly, please enter into pop up Menu to select [Stop] option.
Picture 5-46
Picture 5-47
Picture 5-48
Picture 5-45
